Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support
Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support - Image 2
Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support - Image 3
Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support - Image 4
Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support - Image 5

Industrial 4-Ch Ethernet Remote I/O Controller, Modbus TCP Module with Isolation Protection, Rail-Mount Support

$58.99

Part No. 4CH-IO-ETH SKU: IoT-RIC101 Categories: , Tags: , , , , Brand:

⚠️ Hardware Sub-Model Selection Required

The Analog Input (AI) format is hardware-specific. You cannot switch between 4-20mA and 0-10V via software. Please ensure you select the correct AI sub-model (Current, Voltage, or Resistance) from the dropdown before adding to cart.

Product Overview

The Valtoris 4CH-IO-ETH is an industrial Ethernet Remote I/O Controller for field sensor aggregation. It is a Modbus TCP to RTU gateway that natively bridges 4 Digital Inputs, 2 Analog Inputs and 4 Relay Outputs into your local area network (LAN) for SCADA integration.

Quick Specs & Capabilities

  • Network Interface: Ethernet RJ45. Supports Modbus TCP / Modbus RTU / Virtual Serial.
  • Digital I/O: 4x DI (Active/Passive compatible), 4x DO (Relay 5A@250VAC).
  • Analog Inputs: 2x AI. Configured at factory based on your order (4~20mA, 0~5V, 0~10V, or 10kΩ).
  • P2P Control: Supports pairing two modules over LAN (Module A DI triggers Module B DO without a PLC).
  • Active Push: Can be configured to actively report DI state changes or AI data to the server, reducing polling traffic.
  • Power & Mounting: DC 9~24V wide voltage input. Ultra-compact SECC chassis with standard 35mm DIN-rail mount.
Hardware & Interfaces
Network Interface1x RJ45 (Ethernet 10/100M)
Power Input9~24V DC (Terminal Block)
Power Consumption< 1.8W, < 75mA @ 24V DC
I/O Configuration
Digital Inputs (DI)4 Channels (Passive switch or Active level 9V/24V)
Digital Outputs (DO)4 Channels (Relay Output: 5A@250VAC / 30VDC)
Analog Inputs (AI)2 Channels
AI Sub-model Options4~20mA / 0~20mA / 0~5V / 0~10V / Resistance 0~10kΩ
Software & Performance
ProtocolsModbus RTU / Modbus TCP
Response Time< 30ms
Mechanical & Environment
Dimensions12.2 cm × 7.2 cm × 3.4 cm (L x W x H)
Operating Temp.-40°C ~ +85°C

 

Weight: 0.350 kg

Note: The power supply of this product is not included, please purchase the power supply separately according to your need.

1.4CH-IO-ETH main unit x1

You may also like…