VT-SW8GPN：8 Port Gigabit PROFINET Switch
$79.00
The Valtoris VT-SW8GPN is an industrial-grade, plug-and-play 8 Port Gigabit PROFINET Switch specifically engineered to bridge high-bandwidth machine vision systems with critical PLC control networks. Acting as a transparent Layer 2 device, it delivers deterministic Gigabit forwarding without requiring IP assignments or GSDML configuration files in your PLC software.
| Interface & Performance | |
| Gigabit Ethernet Ports | 8 × 10/100/1000Base-T(X) RJ45, Auto MDI/MDI-X, Full/Half Duplex |
| Protocol Feature | PROFINET protocol priority transmission (Built-in hardware QoS) |
| Switching Capability | Store-and-Forward, 16Gbps Backplane, 1.5Mbit Buffer, 4K MAC |
| Jumbo Frame | 9kByte (Optimized for GigE Vision uncompressed streaming) |
| Power & Environment | |
| Input Voltage | DC 9~60V or AC 24V, Dual power redundancy, Non-polarity |
| Power Consumption | Less than 3.2W @ DC24V (Full load) |
| Terminal Block | 5-pin 5.08mm pitch lock terminal block |
| Mechanical & Compliance | |
| Dimensions / Weight | 102 × 46 × 78 mm (Excluding DIN clip) / Approx. 0.35 kg |
| Housing & Mounting | IP40 Fanless aluminum alloy housing, 35mm DIN-Rail |
| Operating / Storage Temp. | -40°C ~ +75°C / -40°C ~ +85°C |
| EMC Immunity | IEC 61000-4-2 (ESD): Level 4 / Surge: Level 4 / EFT: Level 4 |
| Certifications | CE, FCC, RoHS, UL |
Package Content
- 1 x VT-SW8GPN 8-Port Gigabit Industrial PROFINET Switch
- 1 x 5-Pin Pluggable Terminal Block (Pre-installed on device top)
- 1 x 35mm DIN-Rail Mounting Clip (Pre-installed on device rear)
- Important Procurement Note: An external industrial DC or AC power supply is required to power this module and must be procured separately.
- Engineering Note: As a strictly unmanaged switch, this unit acts transparently on the bus. You do not need to assign it an IP address or import a GSDML file into TIA Portal or STEP 7.
