8-Port Unmanaged PROFINET Switch (RT Priority)
8-Port Unmanaged PROFINET Switch (RT Priority) - Image 2
8-Port Unmanaged PROFINET Switch (RT Priority) - Image 3
8-Port Unmanaged PROFINET Switch (RT Priority) - Image 4
8-Port Unmanaged PROFINET Switch (RT Priority) - Image 5

8-Port Unmanaged PROFINET Switch (RT Priority)

$59.00

Part No. VT-SW8PN SKU: IoT-PES101 Categories: ,

The Valtoris VT-SW8PN is an 8 Port PROFINET Switch, unmanaged, plug-and-play, designed to protect cyclic control data in dense automation panels. As a transparent Layer 2 bridge, it provides deterministic packet forwarding without the need to assign IP addresses or GSDML configuration files in your PLC software.

Interface & Protocol
Ethernet Ports8 × 10/100Base-T(X) RJ45, Auto MDI/MDI-X, Full/Half Duplex
Protocol FeaturePROFINET protocol priority transmission (Built-in QoS)
Switch Capability1.6Gbps Backplane, 768Kbit Buffer, 2K MAC, 2Kbyte Jumbo Frame
Power Supply
Input VoltageDC 9~60V or AC 24V, Dual power redundancy, No polarity
Power ConsumptionLess than 1.4W @ DC24V (Full load)
Connection5-pin 5.08mm pitch lock terminal block
Physical & Environment
Dimensions / Weight102 × 46 × 78 mm (Excluding DIN clip) / Approx. 0.33 kg
Casing & MountingIP40 High-strength aluminum alloy, 35mm DIN-Rail
Operating / Storage Temp.-40°C ~ +75°C / -40°C ~ +85°C
EMC ImmunityIEC 61000-4-2 (ESD): Level 4 / Surge: Level 4 / EFT: Level 4
  • 1 x VT-SW8PN 8-Port Industrial PROFINET Switch
  • 1 x 5-Pin Pluggable Terminal Block (Pre-installed on device top)
  • 1 x 35mm DIN-Rail Mounting Clip (Pre-installed on device rear)
  • 1 x Quick Installation Sheet
  • Important Procurement Note: An external industrial DC or AC power supply is required to run this module and is sold separately.
  • Engineering Note: As a strictly unmanaged switch, this unit acts transparently on the bus. You do not need to assign it an IP address or import a GSDML file into TIA Portal.