Industrial 8-Ch Wi-Fi Input & Output Module, Modbus RTU I/O, Supports RS485 and Ethernet Remote Control, Isolation Protection
Industrial 8-Ch Wi-Fi Input & Output Module, Modbus RTU I/O, Supports RS485 and Ethernet Remote Control, Isolation Protection - Image 2
Industrial 8-Ch Wi-Fi Input & Output Module, Modbus RTU I/O, Supports RS485 and Ethernet Remote Control, Isolation Protection - Image 3
Industrial 8-Ch Wi-Fi Input & Output Module, Modbus RTU I/O, Supports RS485 and Ethernet Remote Control, Isolation Protection - Image 4

Industrial 8-Ch Wi-Fi Input & Output Module, Modbus RTU I/O, Supports RS485 and Ethernet Remote Control, Isolation Protection

$78.99

Part No. 8CH-IO-WF SKU: IoT-RIC103 Categories: , Tags: , , , ,

⚠️ Hardware Sub-Model Selection Required

The format of an Analog Input (AI) is hardware dependent. You cannot switch 4-20mA, 0-5V, or 0-10V with software. Please make sure you choose the right AI sub-model from the drop-down menu before adding to cart.

Product Overview

The Valtoris 8CH-IO-WF is an industrial Wireless Remote I/O Controller that removes the cost of pulling cable. It integrates natively 8 Digital Inputs, 8 Relay Outputs, 8 Analog Inputs and a dedicated RS485 serial gateway. It is the perfect wireless edge node for your SCADA system, sending data over plain 802.11b/g Wi-Fi networks using Modbus TCP.

Quick Specs & Capabilities

  • Network Interface: Wi-Fi (802.11 b/g) and 10/100M Ethernet RJ45. Supports Modbus TCP/RTU.
  • Digital I/O: 8x DI (Active/Passive compatible), 8x DO (Relay 5A@250VAC/30VDC).
  • Analog Inputs: 8x AI. Configured at factory (4~20mA, 0~5V, 0~10V).
  • Serial Gateway: Built-in RS485 port for polling external Modbus RTU instruments and bridging data via Wi-Fi.
  • Advanced Features: Supports AP/STA modes, P2P wireless control, and Active reporting.
  • Power & Size: DC 9~24V input. Dimensions: 19.7cm × 9.2cm × 2.5cm.
Hardware & Interfaces
Network InterfaceWi-Fi (802.11 b/g) / 10/100M Ethernet (RJ45)
Serial Port1x RS485 (1200~115200 bps)
Antenna InterfaceWi-Fi Antenna Port
I/O Configuration
Digital Inputs (DI)8 Channels (Passive Dry Contact or Active Level 9V/24V)
Digital Outputs (DO)8 Channels (Relay Output: 5A@250VAC / 30VDC)
Analog Inputs (AI)8 Channels
AI Supported FormatsCurrent (4~20mA, 0~20mA), Voltage (0~5V, 0~10V), or Resistance (0~10K)
Software, Power & Environment
ProtocolsModbus TCP / Modbus RTU
Power InputDC 9~24V (Terminal Block or DC Jack)
Power Consumption< 220mA @ 24V DC
Dimensions19.7 cm × 9.2 cm × 2.5 cm
Operating Temp.-40°C ~ +85°C

Weight: 1 kg

1. 8CH-IO-WF main unit x1

 

2. OPTIONS 12V 1.0A power adapter x1  

3. WiFi glue stick antenna x1