VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch
VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch - Image 2
VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch - Image 3
VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch - Image 4
VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch - Image 5

VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch

$249.00

Part No. VT-SW10GP-2GF-8GTPOE SKU: IoT-IPS103 Categories: ,

The Valtoris VT-SW10GP-2GF-8GTPOE 10-Port Gigabit Industrial PoE Switch, unmanaged, for high-density edge deployments. This device overcomes the challenge of powering multiple high-load devices (e.g. 4K PTZ cameras) while enabling long-distance, daisy-chained fiber routing by integrating eight IEEE 802.3at/af PoE+ ports (30W max per port) and two independent 1000Base-X SFP slots.

EDesigned specifically for harsh industrial environments where air conditioning is not available, the switch is housed in tough IP40 metal and cooled passively and without fans for reliable operation from -40°C to +85°C. High network availability is provided by two DC48-52V power inputs with dual power supply redundancy and 6kV lightning surge protection on all copper ports. This is a true plug-and-play DIN-rail solution that reduces wiring complexity and maximizes network uptime.

Hardware Interface
PoE Ports (Downlink)8 × 10/100/1000Base-T(X) RJ45, IEEE 802.3af/at, Max 30W per port
Fiber Ports (Uplink)2 × 1000Base-X Gigabit SFP slots
Switching Performance
Backplane Bandwidth20 Gbps
MAC Table & Buffer4K MAC Address Table / 1.5 Mbit Buffer Size
Power & Environment
Input VoltageDual DC 48~52V (Redundant Inputs), Anti-reverse connection
Power Consumption< 7W @DC48V (System full load, no PoE device connected)
Operating Temperature-40°C ~ +85°C
EMC ProtectionIEC 61000-4-2 (ESD) Level 4 / IEC 61000-4-4 (EFT) Level 4
Surge & LightningIEC 61000-4-5 (Surge) Level 4; Network ports support 6kV lightning protection
Mechanical
Casing & MountingIP40 High-strength metal shell, 35mm standard DIN-Rail mounting
Dimensions / Weight140 × 54 × 110 mm / Approx. 0.78 kg

📦 Package Content

  • 1 × VT-SW10GP-2GF-8GTPOE Industrial Ethernet Switch
  • 1 × 5-Pin Pluggable Terminal Block (Pre-installed for power input)
  • 1 × 35mm DIN-Rail Mounting Clip (Pre-installed on the back)
  • 1 × User Manual
  • Important Note 1: The two Gigabit SFP optical transceiver modules are not included. You must purchase the appropriate 1.25G SFP modules separately based on your specific fiber transmission requirements.
  • Important Note 2: A compatible industrial DC48-52V power supply is required for operation and is not included in the standard package.