VT-SW3EC 3-Port EtherCAT Junction Switch

$99.00

Part No. VT-SW3EC SKU: IoT-EES101 Categories: ,

The Valtoris VT-SW3EC is a pure hardware 3-Port Industrial EtherCAT Switch. It functions as a very reliable network junction. With one input and two output ports, it enables control engineers to branch standard linear EtherCAT networks into efficient tree or star topologies, greatly simplifying complex machine wiring.

The VT-SW3EC is no normal, dumb Ethernet switch, but comes with an integrated EtherCAT slave controller. It processes Ethernet frames in real-time with nanosecond latencies and provides full support of Distributed Clocks (DC). This ensures the precise synchronization needed between PLCs and servo drives in advanced automation systems.

Hardware Interface & Protocol
Protocol StandardEtherCAT (Comply with EtherCAT conformance test)
EtherCAT Ports3 × 100M EtherCAT copper ports (1 Input, 2 Outputs)
Network Capability
Topology SupportLinear, Tree, Star, or combinations
Cascading CapabilityUp to 65,535 slaves per network segment
Transmission DelayNanosecond delay (Real-time hardware processing)
Power & Environment
Input VoltageDC 9~60V or AC 24V (Non-polarity power input)
Power Consumption< 1.5W @ DC24V
Operating Temperature-40°C ~ +75°C
EMC ProtectionIEC 61000-4-2 (ESD) Level 3 / IEC 61000-4-4 (EFT) Level 3
Surge ProtectionIEC 61000-4-5 (Surge) Level 3; 6kV lightning protection on network ports
Mechanical
Casing & MountingIP40 High-strength aluminum alloy shell, 35mm DIN-Rail mounting
Dimensions / Weight102 × 33 × 78 mm / Approx. 0.26 kg

 

  • 1 × VT-SW3EC 3-Port Industrial EtherCAT Switch
  • 1 × 3-Pin Pluggable Terminal Block (Pre-installed for power input)
  • 1 × 35mm DIN-Rail Mounting Clip (Pre-installed on the back)
  • 1 × User Manual
  • Important Note 1: An ESI (EtherCAT Slave Information) XML file is required for configuration and can be downloaded from our technical portal.
  • Important Note 2: A compatible DC or AC power supply is required for operation and must be procured separately.