6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+)
6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+) - Image 2
6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+) - Image 3
6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+) - Image 4
6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+) - Image 5

6-Port Gigabit Industrial PoE Switch (2 SFP + 4 PoE+)

$149.00

Part No. VT-SW6GP-2GF-4GTPOE SKU: IoT-IPS102 Categories: ,

In addition to its dual-fiber capabilities, the switch offers four dedicated 10/100/1000Base-T(X) RJ45 ports which strictly conform to IEEE 802.3af/at standards. With a power budget of up to 30W per port (120W total) it easily powers heavy-load edge devices including 4K surveillance cameras wireless access points and industrial sensors over standard Ethernet cables.

Engineered for the highest reliability in non-climate controlled environments, it features a robust IP40 aluminum alloy enclosure, passive fanless cooling (-40°C to +75°C) and dual DC48-52V redundant power inputs. This unmanaged plug-and-play switch has built-in 4kV lightning surge protection on all network ports and Level 4 ESD immunity, allowing uninterrupted data transmission under severe electrical transients.

Hardware Interface
PoE Ports (Downlink)4 × 10/100/1000Base-T(X) RJ45, IEEE 802.3af/at, Max 30W per port
Fiber Ports (Uplink)2 × 1000Base-X Gigabit SFP slots
Switching Performance
Backplane Bandwidth14 Gbps
MAC Table & Buffer2K MAC Address Table / 2 Mbit Buffer Size
Power & Environment
Input VoltageDual DC 48~52V (Redundant Inputs), Anti-reverse connection
Power ConsumptionSystem: < 3.5W @DC48V (No PoE load)
Operating Temperature-40°C ~ +75°C
EMC ProtectionIEC 61000-4-2 (ESD) Level 4 / IEC 61000-4-4 (EFT) Level 4
Surge & LightningIEC 61000-4-5 (Surge) Level 4; Network ports support 4kV lightning protection
Mechanical
Casing & MountingIP40 High-strength aluminum alloy shell, 35mm DIN-Rail mount
Dimensions / Weight140 × 35 × 100 mm / Approx. 0.5 kg

📦 Package Content

  • 1 × VT-SW6GP-2GF-4GTPOE Industrial Ethernet Switch
  • 1 × 5-Pin Pluggable Terminal Block (Pre-installed for power input)
  • 1 × 35mm DIN-Rail Mounting Clip (Pre-installed on the back)
  • 1 × User Manual
  • Important Note 1: The two Gigabit SFP optical transceiver modules are not included and must be purchased separately based on your network topology requirements.
  • Important Note 2: A compatible industrial DC48-52V power supply is required for operation and is not included in the standard package.